The difference between accounts payable vs accounts receivable is direction. Accounts payable (AP) is the money your shop owes vendors, and accounts receivable (AR) is the money customers owe your shop.
Your parts vendors understand this perfectly. They have a whole department devoted to your AP. (It’s called their AR department, and it has never once lost your phone number.)
That’s the short answer. AP is a current liability on your balance sheet. AR is a current asset. One goes out, one comes in.
Full disclosure before we go further: I run WickedFile, which lives entirely on the AP side. It reads your parts invoices, credit memos and vendor statements, then flags the returns and cores your vendors never credited. You can do everything in this post with a highlighter first, and I’ll show you how.
Accounts payable vs accounts receivable, side by side
Here is the whole thing on one screen.
| Accounts payable (AP) | Accounts receivable (AR) | |
|---|---|---|
| What it is | Money you owe suppliers for things bought on credit | Money customers owe you for work sold on credit |
| Balance sheet | Current liability | Current asset |
| Normal balance | Credit | Debit |
| Shop examples | Parts store invoices, dealer parts, tires, sublet, towing | Fleet accounts on terms, warranty claims, charge customers |
| Source document | Vendor invoice, credit memo, statement | Your repair order and customer invoice |
| Cash direction | Out | In |
| Who chases it | The vendor | You (in theory) |
AccountingTools defines accounts payable as “the aggregate amount of one’s short-term obligations to pay suppliers for products and services that were purchased on credit.” Its definition of accounts receivable is the mirror: “money due to a seller from buyers who have not yet paid for their purchases.”
Notice the last row of that table. It’s the one that matters most in a repair shop, and I’ll come back to it.
What is accounts payable in a repair shop?
In a repair shop, AP is mostly parts.
Every time an advisor calls the parts store, a tech grabs a filter from the dealer, or a sublet alignment comes back with an invoice, you’ve added to AP. You don’t pay that moment. You pay on the vendor’s statement, usually monthly.
The journal entries are simple:
- Invoice arrives: debit parts inventory or cost of goods sold, credit accounts payable.
- You pay it: debit accounts payable, credit cash.
- Vendor issues a credit memo: debit accounts payable, credit parts cost.
That third entry is the one that gets skipped. AccountingTools describes a credit memo as a document from the seller “reducing the amount that the buyer owes to the seller under the terms of an earlier invoice.” No credit memo, no reduction. You pay the original number.
The volume is the problem. In the 2026 Ratchet+Wrench Industry Survey of 430+ shops, 47% said they use five or more regular parts vendors each month. Five vendors, several people ordering, returns and cores going back on the driver’s truck. That’s a lot of moving paper for one AP account.
If you want the full workflow from invoice to payment, the accounts payable process post walks through it step by step. And if you’ve ever wondered why AP is a liability and not an expense, that question has its own answer.
What accounts receivable looks like in a repair shop
AR in most independent shops is small. That surprises people who learned accounting from a textbook about a widget factory.
Retail customers pay at pickup. Card, cash, financing, done. No receivable.
AR shows up when you let someone pay later:
- Fleet and commercial accounts billed on terms.
- Warranty and service contract claims you’ve submitted and are waiting on.
- The customer you let drive away because you’ve known him for twenty years. (You know the one. He’s good for it. He’s also 47 days out.)
AR entries flip the AP ones. Bill the fleet: debit accounts receivable, credit sales. Fleet pays: debit cash, credit accounts receivable.
The fix for AR is not complicated. Run an aging report weekly. Call anything over terms. Stop extending credit to anyone over 60 days until they catch up. QuickBooks Online has an A/R aging report built in if your shop management system doesn’t.
My seven-month-old daughter, for the record, runs a pure receivables business. She collects constantly, pays nothing, and her terms are “when I sleep through the night.” I’ve stopped sending statements.
Your AP is your vendor’s AR, and they’re better at collecting it
Here’s the part the textbook definitions leave out.
Every dollar in your AP is a dollar in some vendor’s AR. Their AR team has aging reports, credit limits and a person whose job is to make sure you pay. If you’re late, they call. If you’re very late, they put you on COD.
Now flip it. When a vendor owes you money (a return, a core, a pricing correction), that money doesn’t live in your AR. It lives in your AP, as a credit memo that’s supposed to reduce what you owe. If the vendor never issues it, nothing on your books looks wrong. Your AP just stays higher than it should, and you pay it.
Nobody at the vendor is assigned to remind you. And at most shops, nobody in-house is assigned to chase it either.
That’s where the money goes. Not dramatically. Quietly, one statement at a time.
Here’s what it looks like. These numbers are illustrative, so swap in your own.
Say your shop buys $60,000 of parts a month. Over the month, the driver takes back:
- Four returned parts worth $780 total.
- Five cores averaging $84 each, for $420.
That’s $1,200 that should come back as credit memos. Say none of it shows up on the statement, and you pay the statement as printed. You’ve just paid $1,200 for parts you don’t have.
Now the math that should bother you. According to accounting firm Paar Melis’s 2025 benchmark report, the average shop’s parts gross profit runs about 46.1%. To earn $1,200 of gross profit back on parts, you’d need to sell about $2,603 in parts. That’s several brake jobs worth of selling to make up for paper nobody followed.
Do it every month and it’s $14,400 a year, from a shop that’s otherwise doing everything right. The core charges deep-dive breaks down how cores specifically slip through.
Every purchased part deserves an ending
There are only a few acceptable endings for a part your shop buys. It was sold to a customer on a repair order. It went into inventory. It was returned and credited. It was used internally.
That’s the reason AP and AR can’t be managed in separate silos at a repair shop. The repair order is the bridge. The vendor invoice says what you bought. The RO says what you sold. If an invoice line has no RO line, no credit memo and no inventory home, that part doesn’t have an ending yet.
Bob, my co-founder, learned this the expensive way. Before WickedFile, he owned multiple repair shops. About a decade ago he discovered more than $180,000 had gone missing through collusion between a technician and a service advisor. They ordered duplicate parts and worked the process around them.
It wasn’t one big theft. It was a slow accumulation of parts that showed up on vendor invoices and never showed up on a sale.
Here’s the operational lesson, and it isn’t “watch your employees.” The AP side looked normal: invoices arrived, statements got paid. The sales side looked normal too: ROs closed, customers paid. Each ledger, on its own, was fine. The loss only appeared when you asked whether every purchased part matched something sold, returned or stocked. Nobody was asking yet.
Matching AP to the RO is the control. It protects you from honest mistakes far more often than dishonest ones.
A weekly accounts payable vs accounts receivable routine
You don’t need a controller for this. You need forty-five minutes a week and a habit.
AP side (most of the money):
- Collect every parts invoice and credit memo from the week. Driver’s clipboard, email, vendor portal.
- Make sure each invoice has a PO number, ideally the RO number.
- For every return or core that went back this week, write it on a “credits owed” list with the vendor, part and amount.
- Cross off credits as the credit memos arrive. Anything older than two weeks gets a call to the vendor.
- At month end, check the statement against your invoices and your credits-owed list before you pay. The vendor statement reconciliation guide has the line-by-line method.
AR side (usually smaller):
- Run the AR aging report.
- Call anything past terms.
- Follow up on any warranty or service contract claim older than your usual payment cycle.
Notice the asymmetry. AR has a built-in report that tells you who owes you. AP credits don’t. That’s why the credits-owed list in step 3 exists: it’s the aging report your vendor will never send you. A clean credit memo habit makes the whole list shorter.
Somebody has to work your vendors’ side of the ledger
Your vendors employ someone to collect from you. The honest question is who you employ to collect from them.
For a small shop with two vendors, the answer can be a clipboard and the routine above. I mean that. A highlighter and a credits-owed list will catch most of it, and you don’t need to buy anything.
Once you’ve got five or more vendors, multiple people ordering, or more than one location, the list gets long and the clipboard gets lost. That’s what WickedFile is built for.
What it reads: your vendor invoices, credit memos and statements (uploaded or emailed in), your repair orders from your shop management system, your QuickBooks Online data, and bank and card activity through Plaid.
What it flags on the AP vs AR seam:
- Parts on a vendor invoice that never appear on a repair order.
- Returns and cores sent back with no credit memo behind them.
- Credit memos the vendor issued but never applied to the statement.
- Statement lines with no invoice to support them.
- Card or bank charges to a parts vendor with no invoice attached.
How to spend the free trial: you get 500 scanned pages, no credit card. Take last month’s invoices, credit memos and statements from your two biggest parts vendors and run them through. That’s usually where the most returns and cores live, and it’ll tell you quickly whether your credits-owed list has gaps.
What it doesn’t do: WickedFile doesn’t touch your receivables. It doesn’t invoice customers, run your AR aging or collect from fleets. It’s not a payment processor and it doesn’t pay your vendors. It doesn’t replace QuickBooks or your bookkeeper, and it isn’t shop management software. After the trial, the Grow plan is $299 a month, flat.
Run your two biggest vendors through the free trial →
Your vendor’s AR department will keep calling about what you owe. That’s fine. It’s their job. Just make sure somebody at your shop has the reverse job, so the next phone call about money is one you get to make.
