Accounts payable outsourcing is a decision most shop owners make at 9 p.m. on the last day of the month, under one desk lamp, with a stack of parts invoices and a highlighter that died in March. Accounts payable outsourcing means paying an outside firm to receive, enter, approve and pay your vendor bills, so you do not have to.
(I have been the guy under that lamp, with my dad’s invoices and my handwriting. I still flinch at a dead highlighter.)
Some shops should absolutely do it. Others are paying someone to move a problem to a new address. The difference comes down to one question: who in this arrangement knows what happened in the bays?
For transparency: I run WickedFile, which is not an outsourcing firm. It reads invoices and credit memos and flags what does not match the RO or the statement, no matter who keys the bills. I will give you the fair version of the outsourcing decision before I get anywhere near that.
What accounts payable outsourcing actually covers
“Accounts payable services” is a wide menu. Depending on the firm, outsourced AP can include:
- Receiving invoices. A dedicated inbox or mailing address where vendors send bills.
- Data entry and coding. Entering bills into QuickBooks or your accounting system and coding them to the right accounts.
- Approval routing. Sending bills to you or a manager before they are paid.
- Payment runs. Scheduling checks, ACH or card payments on your terms.
- Vendor inquiries. Answering “where’s my money” calls.
- Statement reconciliation. Sometimes included. Often an add-on. Ask.
- 1099 preparation. Usually at year end.
Notice what is missing from that list. Nothing on it requires walking into the shop. (Or stepping in whatever is leaking under bay three.) That is the whole model, and it is both the strength and the gap.
What an outside AP team cannot see from their desk
An outsourcer sees what lands in their inbox. They know the vendor billed you $412 for a starter on RO 18233. They do not know the tech pulled the wrong one, the advisor sent it back on Thursday’s truck, and the return slip is in the top drawer at the front counter.
So the statement shows up with the $412 charge and no credit. Everything on it has an invoice behind it. By the paperwork, it is valid. It gets paid.
The firm did its job. The job was just defined without the shop in it.
Here is the illustrative math on what that costs:
- A shop buys $50,000 a month in parts.
- Returns and cores run 8% of purchases, so roughly $4,000 a month should come back as credits.
- If 7.5% of those credits slip through because nobody outside the shop knew to expect them, that is $300 a month, or $3,600 a year.
Your numbers will differ. The point is that the leak lives exactly in the space between the bay and the back office, and outsourcing widens that space.
There is a phrase that makes this worse: “we’ve always done it this way.” If the in-house process was “pay whatever the statement says,” outsourcing it does not fix it. It just gets it done that way somewhere else, faster and on letterhead. The process has to change first, or at least at the same time.
In-house vs outsourced AP: the fair comparison
Neither one is automatically better. Here is how they compare for a repair shop:
| In-house AP | Outsourced AP | |
|---|---|---|
| Who does the work | Your bookkeeper, office manager or you | An outside team |
| Shop context | High. They can walk to the counter and ask | Low. They depend on what you send them |
| Coverage when someone quits or gets sick | Weak. One person often holds it all | Strong. The firm covers it |
| Separation of duties | Hard in a small office | Easier, if you split it on purpose |
| Cost | Wages, taxes, training, turnover | A per-invoice or monthly fee you can compare |
| Scales to more locations | Needs more hires | Usually just a bigger invoice count |
On cost, I will not print a market rate for outsourced AP. Quotes vary with invoice volume, vendor count and what is included, and nobody publishes a figure I could verify. Here is a better test, with illustrative numbers. If your bookkeeper spends 20 hours a week on AP at $25 an hour, that is about $2,000 a month in wages before payroll taxes. Get two or three quotes for the same scope and compare them to your own number, not to someone’s blog. If you are weighing software instead of people, here is what AP automation software actually does.
Outsourcing is the right call for some shops
I mean that. It is a good fit when:
- The owner is the AP department. Your time is worth more on the floor or with customers than keying invoices at night.
- Your bookkeeper just left. Outsourcing buys you continuity while you decide what’s next.
- You are a multi-location group without a central AP clerk. A firm can absorb volume from five stores faster than you can hire.
- You need someone outside the building to separate duties. More on that next.
It is a poor fit when you have only two or three vendors and a few dozen invoices a month, or when nobody in the shop will answer the firm’s questions within a day. An outsourcer with no answers just pays what is in front of them.
Separation of duties is the best reason to outsource, and the biggest risk
In a small shop, one person often receives the invoices, enters them, pays them, and reconciles the bank. That is a control gap. AccountingTools puts the principle simply: no single person should control authorization, recordkeeping, and custody of assets for the same transaction.
Small businesses feel this most. In the ACFE’s Occupational Fraud 2024: A Report to the Nations, billing schemes showed up in 31% of cases at organizations with fewer than 100 employees, versus 22% at larger ones. The same report found billing schemes typically ran 18 months before detection.
An outside firm can close that gap. It can also become it.
One of our customers learned this the hard way. The person stealing from the business was not in the shop. It was their accountant. The losses got large enough that the FBI became involved. Nobody hires an accountant expecting that. Which is exactly why the controls have to exist anyway. The ACFE numbers rhyme with it: perpetrators working in accounting were behind 12% of cases, with a median loss of $208,000.
So split the jobs on purpose:
- The outside firm enters and schedules bills.
- Someone inside approves payments. Usually the owner or controller.
- Someone inside (or a tool) checks bills against the shop. Returns, cores, ROs.
- Nobody outside the business can add a vendor and pay it without an inside approval.
Trust, but verify. That applies to the firm you hire to do the verifying.
Eight questions to ask an accounts payable outsourcing firm
- Who keeps the invoices, and where? The IRS says to generally keep records that support your tax return for 3 years, and longer in some situations. Make sure you can get yours back.
- What happens when a credit memo is missing? Do they flag it, chase the vendor, or pay the statement?
- Is vendor statement reconciliation included? If yes, are they matching against your returns, or just against invoices they have seen? (Here is how statement reconciliation should work in a shop.)
- Who approves payments, and how?
- What bank access do they need? View only, pay with approval, or full control.
- How do they price? Per invoice, per vendor, or flat monthly. Ask what counts as an invoice.
- How fast do bills move? If a vendor offers early-payment discounts, slow processing costs real money.
- What happens if you leave? Exports, document access and a handoff period, in writing.
If you are still deciding what the process itself should look like, start with the accounts payable process and come back. For multi-store groups, the multi-location back office guide covers centralizing AP.
Whoever keys the bills, someone has to check them against the shop
Outsource the typing if it makes sense. Do not outsource the question “did this actually happen?” That question needs the shop’s data, and an outside firm rarely has it.
That gap is what WickedFile covers. It reads your vendor invoices, credit memos and statements as PDFs, scans or photos. It pulls repair orders from your shop management system, bills and credits from QuickBooks Online, and bank and card transactions through Plaid. Then it flags what does not line up: returns with no credit, uncredited cores, invoices with no RO, statement lines with nothing behind them, and card charges with no invoice. Your outsourcer, bookkeeper or controller gets an exception list instead of a stack.
Here is how I would use the free trial (500 scanned pages, no credit card) on this decision. Take last month’s invoices, credit memos and statements from your two biggest parts vendors and run them before you sign anything. Whatever it flags is the work an outsourcer would have paid straight through. That gives you a sharper question for every firm you interview.
What it does not do: WickedFile does not pay vendors, does not process payments, and does not replace QuickBooks, your bookkeeper or an outsourcing firm. It is not a shop management system either. After the trial, the Grow plan is $299 a month, flat.
Run last month’s statements through the free trial →
Outsource the highlighter if you want. Just keep one person in the building who knows where the return slips live. That drawer has been holding your money hostage long enough.
