Every repair shop has a month end close checklist. It lives in the bookkeeper’s head, it has one step (“make it balance”), and it goes on vacation the same week she does.
A month end close checklist is the written list of tasks you finish after the month ends so your books are complete and correct before anybody trusts the P&L. The month end close itself is the process: capture every transaction, reconcile every account, record what’s owed but not yet billed, review the numbers, and lock the period so nobody edits it later.
That’s the generic answer, and every accounting firm’s checklist covers it well. This one is for a single repair shop, where the hard part isn’t journal entries. It’s parts invoices, credit memos, cores, and a vendor statement that shows up on the 6th.
(Quick disclosure: I run WickedFile, which reads your parts invoices and credit memos and flags the ones missing from your books before you close. You don’t need it to use this checklist. It’s written to work with a pen.)
What a month end close actually has to prove
Strip away the jargon and an accounting close answers three questions:
- Is all the money that came in recorded? Every RO, every card batch, every cash deposit.
- Is all the money that went out, or is owed, recorded? Every vendor invoice, every credit, every payroll dollar.
- Does what’s left match reality? Bank balance, card balance, what you owe each vendor, inventory if you track it.
Question two is where repair shops struggle. Revenue comes in through one door, the shop management system. Costs come in through a dozen: parts houses, the dealer, the tire distributor, sublet, the card, the delivery driver’s clipboard. Ten doors are a lot to keep an eye on.
The month end close checklist for a single repair shop
Here’s the month end close process broken into four stages. Days are business days after month end. Adjust them to your bookkeeper’s actual schedule.
Before the month ends (last week)
- Chase open repair orders. Any RO that’s finished but not closed out will land in the wrong month. Close it or know why it’s open.
- Walk the returns shelf. List every part waiting to go back and every core in the bin. Write the vendor and RO next to each one.
- Ask the counter for stray paperwork. Invoices in toolboxes, delivery bags, and the shop truck. Every shop has one glovebox that’s secretly a filing cabinet.
Days 1 to 3: capture everything
- Confirm sales. Run the SMS sales report for the month and make sure it matches what’s posted in your books.
- Tie deposits to the SMS. Card batches, cash, and checks against what the SMS says you collected, day by day.
- Enter every vendor invoice dated in the month. Including the ones that arrived on the 1st and 2nd for parts used on the 30th.
- Enter every credit memo. Returns and core credits, both. A return slip isn’t a credit. The credit memo is.
- Match card purchases to invoices. Every parts charge on the shop card should have an invoice behind it.
Days 3 to 7: reconcile
- Reconcile every bank account to the statement. If it’s been a while, here’s how to do a bank reconciliation properly.
- Reconcile every credit card the same way.
- Reconcile vendor statements as they arrive, starting with your biggest parts vendors. Every statement line needs an invoice or credit in your books. Vendor statement reconciliation covers the line-by-line method.
- Update the pending credits list. Anything returned but not credited stays on it, with a date. Old items get a phone call.
- Review your AP aging. Anything unexpected past due is either a missing payment or a missing credit. Tracking your accounts payable turnover month to month shows whether that aging is drifting.
Days 7 to 10: adjust, review, lock
- Record accruals. Payroll earned in the month but paid in the next. Bills you know you owe but haven’t received, like a utility or a late sublet invoice.
- Record sales tax payable and check it against your SMS tax report.
- Adjust inventory if you track stocked parts, based on a count or your SMS inventory value.
- Review the P&L against last month. Parts gross profit, labor gross profit, and any expense line that moved more than you’d expect. Ask why before you accept it.
- Lock the period. In QuickBooks Online, Intuit’s guide to locking your books walks through setting a closing date, and you can require a password to change anything dated on or before it. Use the password. Future you will thank present you.
That’s the list. Eighteen steps sounds like a lot. Most of them take five minutes if the paperwork was handled during the month, and an afternoon each if it wasn’t.
Month end closing breaks at the parts invoice cutoff
The most expensive mistake in a repair shop’s month end closing isn’t a math error. It’s timing.
Parts sold on the last few days of the month often get invoiced late, or the invoice gets entered next month, or it never gets entered at all. The RO is in June. The cost lands in July, or nowhere.
Here’s what that does. Illustrative numbers for one shop, one month:
| As closed | After the missing invoices | |
|---|---|---|
| Parts sales | $48,000 | $48,000 |
| Parts cost recorded | $25,000 | $29,200 |
| Parts gross profit | $23,000 | $18,800 |
| Parts GP % | 47.9% | 39.2% |
$4,200 of parts invoices missed the cutoff. That’s enough to make a shop that’s running well below benchmark look a bit above it. For context, accounting firm Paar Melis’s 2025 benchmark report, built from 2024 shop financials, puts average parts gross profit at about 46.1%. At 47.9%, nobody asks questions. At 39.2%, somebody should.
And next month gets the bill. July’s parts margin drops for no reason anyone can explain, and the service advisors get a lecture they didn’t earn.
Credits work the opposite way. A return credited in July for a part sold in June quietly flatters July. Cores that never get credited at all just sit there as cost forever. (A core in the bin past its return window has roughly the resale value of my daughter’s teething ring. Less, honestly. The teething ring gets a lot of use.) If cores are a recurring headache, where core charges leak breaks down the five places that happens.
Invoice history is evidence, not clutter
At an industry conference, a shop owner stopped by our booth, heard what WickedFile does, and asked a genuinely puzzled question: why would anyone keep invoice history? He just threw it all away.
Another owner standing nearby couldn’t let that go. The two of them ended up in a real debate about whether keeping auditable financial records was even necessary.
It’s funny until you think about the close. You can’t reconcile a statement against an invoice you threw away. You can’t prove a core credit is missing if you can’t find the invoice that charged for the core. And you definitely can’t answer a question from your CPA about a cost in March.
The IRS has its own view too. Its guidance on how long to keep records says to keep records for 3 years in most cases, longer in specific ones (7 years for a bad debt deduction, at least 4 years for employment tax records), and to check whether your insurer or creditors require more. That’s not legal or tax advice from me. It’s a strong hint to ask your CPA before the shredder comes out.
A real AP process isn’t optional. Every shop ends up building one eventually. The only question is whether it happens on purpose, or after a month where the close found something it should have found three months earlier.
Soft close most months, but never skip the vendor side
If eighteen steps every month feels heavy, you’re not wrong. AccountingTools describes a soft close as “closing the books using an abbreviated closing procedure,” which often skips accruals and some account reconciliations. Its suggested compromise is a full close when statements go to outsiders, like year end, and a soft close in the other months.
That’s reasonable for a repair shop with one exception. AccountingTools also says that if your results are especially sensitive to a skipped step, add it back. In auto repair, parts are that step. Skip the accruals if you must. Don’t skip steps 6, 7, 11, and 12.
Running more than one shop changes the close
This checklist is built for one location. A group adds consolidation, intercompany transfers, shared vendors billing several stores on one statement, and a chart of accounts that has to match across every entity. That’s a different job, and multi-location auto repair accounting covers it properly.
The single-shop steps still apply to each store. The group close is what sits on top.
A close should confirm the month, not discover it
The fastest closes I’ve seen share one habit: invoices and credits get entered and checked during the month, so the statement on the 6th only confirms what’s already in the books. When the statement is the first time anyone looks, the close turns into a search party.
That’s the part WickedFile handles. It reads your vendor invoices, credit memos, and statements, pulls repair orders from your shop management system, connects to QuickBooks Online, and watches bank and card feeds through Plaid. For the month end close, it flags:
- Statement lines with no invoice in your books, before you pay.
- Credit memos issued but not applied to the statement.
- Returns and cores sent back with no credit yet. Your pending credits list, built for you.
- Card and bank charges to vendors with no invoice behind them.
- Parts bought for an RO but never sold on it, which is the cutoff problem from the table above, caught at the RO level.
Here’s how I’d spend the free trial, 500 scanned pages with no credit card, on this exact problem. Take last month’s statements from your two biggest parts vendors, plus their invoices and credit memos. Upload them. Compare what WickedFile flags against what your close actually caught. If the lists match, your close is tight and you’ve learned that for free.
What it won’t do: WickedFile isn’t a shop management system, and it isn’t a payment processor. It doesn’t post your accruals, reconcile your bank account for you, or replace QuickBooks or your bookkeeper. It’s the vendor side of the close, done during the month instead of on day eight. After the trial, the Grow plan is $299 a month, flat.
If your shop buys from two vendors and your bookkeeper already ticks every statement line, keep doing that. A checklist and a good habit beat software you don’t need.
Try it on last month’s statements →
Once your close runs on a checklist instead of a memory, it’ll start finishing on the same day every month, which will make it the most reliable thing in the building. (Sorry, shop coffee maker. You had a good run.)
